Specifications

HBZTX6-IN-4 Page 5
1 Important Safeguards
This product is exclusively for use in CCTV applications and has no other purpose.
Read and Retain the Instructions - All the safety and operating instructions should be read
before the unit is operated and should be retained for future reference.
Cleaning – Disconnect the power before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
Attachments - Do not use attachments which have not been recommended by the product
manufacturer as they may cause hazards.
Water and Moisture - Do not use this unit near water or in any area that is classified as a
wet location.
Accessories - Do not place this unit on an unstable stand, tripod, bracket, or mount. The
unit may fall, causing serious injury to a person and serious damage to the unit. Any
mounting of the unit should follow the manufacturer's instructions, and should use the
mounting accessory recommended by the manufacturer.
Ventilation - Openings in the enclosure, if any, are provided for ventilation to ensure reliable
operation of the unit and to protect it from overheating, these openings must not be blocked
or covered. This unit should not be placed in a built-in installation unless proper ventilation is
provided. Do not place directly on other hot equipment, because this may increase its
operating temperature.
Power Sources - This unit should be operated only from the class 2 isolated power supply
provided.
Plugs – Some equipment in the system may be equipped with a 3-wire grounding-type plug,
a plug having a third (grounding) pin. This plug will only fit into a grounding-type power
outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact
your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the plug.
Power-cord Protection - Power-supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them, paying particular attention to
cords at plugs, and the point where they exit from the appliance.
Overloading - Do not overload outlets and extension cords as this can result in a risk of fire
or electric shock.