Specifications

HBZTX6-IN-4 Page 7
1.3 Safety and Electromagnetic Compatibility (EMC)
Do not operate the unit outside the voltage and temperature limits given in the specification.
WARNING
To reduce the risk of electrical shock, do not open covers. There are no user
serviceable parts inside. Refer servicing to qualified service personnel.
This product is intended for use in general-purpose CCTV applications in a residential,
commercial or light industrial EMC environment. Refer to your agent before installing or
using the product in medical and/or intrinsically safe applications or in an industrial EMC
environment.
WARNING
This is a Class A product. In a domestic environment this product may cause radio
interference, in which case, the user may be required to take adequate measures.
The product must be installed in accordance with good installation practice, to enable the
product to function as intended and to prevent problems. Refer to your agent for installation
guidance.
Contact your agent to obtain a specification defining the acceptable levels of product
degradation with regard to EMC immunity.
1.4 Manufacturer’s Declaration of Conformance
The manufacturer declares that the product supplied with this document is compliant with the
essential protection requirements of the EMC directive 89/336 and the Low Voltage Directive
LVD 73/23 EEC. Conforming to the requirements of standards EN 55022 for emissions,
IEC801 parts 2, 3 and 4 for immunity and BS415 superseded by EN60950 for Electrical
Equipment safety.
2 Instruction Manuals
These instructions are for installing and setting up the ZTX6. Please read them in
conjunction with the other instructions included with your system:
1) BaxNet and Keyboard Installation Instructions - These instructions are provided
with your Keyboard.
2) The ZTX6/MOD instructions which contain instructions for assembling your ZTX6