Specifications

HBZTX6-IN-4 Page 9
4 Accessories
ZTX6/MOD
This is an additional 8 camera-input, 8 alarm-input,
2 monitor-output module.
Adding subsequent ZTX6/MODs to an 8M2 converts it to a 16M4,
24M6 then a 32M8.
The maximum configuration for the ZTX6 is 32M8. Do not exceed this.
ZTX6/RMA3
The ZTX6/32M8 is 19” 3U standard rack mounting, all the smaller units are not unless fitted
to a ZTX6/RMA3 (Rack Mount Accessory, 3U).
The ZTX6/RMA3 is a steel plate with countersunk holes and screws to allow the attachment
of a ZTX6. The plate is the correct size for rack-mounting.
BAX-RKIT
Remote keyboard wiring KIT, for connecting a keyboard at a distance greater than 10 metres
from the main unit. Can also be used to connect multiple keyboards - includes keyboard
power supply, 2 x BAX-NAP (screw terminal to RJ45 adapters) 1 x BAX-NIL1 and 1 x BAX-
NILA (see below).
BAX-NIL1 1 metre lead, RJ45 to 6-pin-mini-din
BAX-NIL-2/RJ 2 metre lead, RJ45 to RJ45
BAX-NIL4 4 metre lead, RJ45 to 6-pin-mini-din
BAX-NIL9 9 metre lead, RJ45 to 6-pin-mini-din
These leads are for connecting your ZKX2 keyboard to the ZTX6, ZMX matrix or ZMX Plus.
BAX-NILA 1 metre lead, 2 x 6-pin-mini-din
This lead is for connecting local main-units together. It only makes the network connections.
ZT-TP1, ZT-TP4, ZT-TP8
The ZT-TPs connects between your transmitter and receiver in your coaxial line. They
convert the Coaxial-telemetry into 20mA-current-loop-twisted-pair telemetry (for use with, for
example, free-space transmission systems.) Current Baxall receivers accept both 20mA
twisted-pair telemetry and coaxial-telemetry.
The ZT-TP1 is a single module, the ZT-TP4 is 4 x ZT-TP1s with a single power supply and
the ZT-TP8 is 8 x ZT-TP1s with a single power supply.