Technical data

Programming
120-393 632.4 04.08 Fh
PARAMOUNT two 30 - 115 kW 39
Operator section save basic settings
No |Yes
This parameter is only visible in the room device!
30 F
No
Operator section activate basic settings
No |Yes
31 F
No
Use as
Room device 1 | Room device 2 | Operating device |
Service device
This parameter is only visible in the room
device!
40 I
Room device 1
Attribution room device 1
Heating circuit 1 | Heating circuit 1and 2
This parameter is only visible in the room
device, as the operating unit in the boiler is
fixed programmed for the operating device!
42 I
Heating circuit 1
Operation HK2
Together with HK1 | independent
44 I
Together with
HK1
Operation HKP
Together with HK1 | independent
46 I
Together with
HK1
Effect of presence button
None | Heating circuit 1 | Heating circuit 2 | together
This parameter is only visible in the room
device!
48 I
none
Readjustment room sensor
This parameter is only visible in the room
device!
54 F
0.0°C
Time programme heating circuit 1
Pre-selection Mo-Su
Mo-Su | Mo-Fri | Sa-Su | Mo |Tue |Wed Thu | Fri | Sa |
Su
500 E
Mo - Su
1st phase ON
501 E
06:00 (h/min)
1st phase OFF
502 E
22:00 (h/min)
2nd phase ON
503 E
--:-- (h/min)
2nd phase OFF
504 E
--:-- (h/min)
3rd phase ON
505 E
--:-- (h/min)
3rd phase OFF
506 E
--:-- (h/min)
Standard values
No |Yes
516 E
No
Time programme
heating circuit 2
Parameter only visible, if heating circuit 2 exists!
Pre-selection Mo-Su
Mo-Su | Mo-Fri | Sa-Su | Mo |Tue |Wed Thu | Fri | Sa |
Su
520 E
Mo - Su
1st phase ON
521 E
06:00 (h/min)
1st phase OFF
522 E
22:00 (h/min)
Function
Prog.
-No.
Set-
ting
level
1
Standard value
Modi-
fied
value