Technical data

Programming
120-393 632.4 04.08 Fh
PARAMOUNT two 30 - 115 kW 59
The following messages are possible under Boiler:
The following messages are possible under Solar:
Diagnostics heat generation/consumers
Diagnostics heat genera-
tion/consumers (8310 to
8980)
Display of the different nominal and actual values and meter rea-
dings for diagnosis purposes.
Info
Different information values will be displayed, depending on the
operating state. Also, informations about the different operating
states will be displayed (see below).
State boiler The following messages are possible under boiler:
State solar The following messages are possible under Solar:
Push, legionella function
Push, nominal setpoint
Charging, legionella setpoint Legionella function activated
Charging, nominal setp
Charging, reduced setp
Charged, max st tank temp
Charged, max charging temp
Charged, legionella temp
Charged, nominal temp
Charged, reduced temp
Display Dependend on
--- Normal operation
Fault
Monitor has tripped
Manual control active Manual control active
Chim sweep fct, full load Chimney sweep funct active
Locked e.g. Input H1
System Frost Protection
Display Dependend on
--- Not available
Manual control active Manual control active
Fault
Frost prot collector active Collector too cold
Recooling active Recooling via collector active
Max st tank temp reached Storage tank charged to the security temperature
Overtemp prot active Collector overtemp protection and pumps off
Charging DHW
Radiation insufficient
Display Dependend on
Display Dependend on
--- Normal operation
Fault
Monitor has tripped
Manual control active Manual control active
Chim sweep fct, full load Chimney sweep funct active
Locked e.g. Input H1
System Frost Protection
Display Dependend on
--- Not available
Manual control active Manual control active
Fault
Frost prot collector active Collector too cold
Recooling active Recooling via collector active
Max st tank temp reached Storage tank charged to the security temperature