User guide

1.0 Quick Reference Guide
3
© Baxi Heating UK Ltd 2011
Reset
Burner On
Flame Failure
Power On
bar
0
1
2
3
4
Reset
Burner On
Flame Failure
Power On
bar
0
1
2
3
4
ON/OFF/Reset
Selector Switch
Indicator Neons Central Heating
Temperature Control
Domestic Hot Water
Temperature Control
System Pressure Gauge
OFF Position
The boiler will not operate.
Central Heating Temperature Control
Turn the knob clockwise to increase or anticlockwise to decrease the temperature.
Range 35 - 85° C.
Domestic Hot Water Temperature Control
Turn the knob clockwise to increase or anticlockwise to decrease the temperature.
Range 35 - 65° C.
Power On Indicator - The indicator will illuminate when there is power to the boiler.
Flame Failure Indicator - The indicator will illuminate when the burner has not fired.
Burner On Indicator - The indicator will illuminate when the burner has fired and is heating
your central heating or domestic hot water.
Central Heating System Pressure - The normal operating water pressure is shown when the
needle is between 1 and 2.5 bar. If the pressure exceeds 3 bar the safety pressure valve will
operate and a fault is indicated. Contact your Installer.
Reset
Central Heating & Hot Water
Both Heating & Hot Water will operate.
Reset
Hold for approx 5 seconds and release.
Indicator Neons
Position of
Optional Timer
Reset
Domestic Hot Water
Hot Water will operate.