Quick Start Manual

8.0 Installation

8.6 Fitting the Flue (Cont)

8. Ensure the inner flue support bracket is positioned in

the flue (Fig. 24).

9. Engage the flue into the flue elbow using soap

solution to ease the engagement ensuring the flue is

assembled as shown (Fig. 25).

10. Place the gasket over the flue exit on the boiler

(Fig. 25).

11. Slide the flue assembly through the hole in the wall.

Ensure angled inner end slopes downwards (Fig. 26).

12. Engage the elbow on to the flue connection on top

of the boiler. Secure with the four screws supplied in

the kit.

13. Make good between the wall and air duct outside

the building ensuring the 3° drop between the terminal

and elbow.

14. The flue trim should be fitted once the installation

is complete and the flue secure

(Fig. 26). Apply a suitable mastic to the inside of the

trim and press against the wall finish, making sure the

brickwork is dust free and dry.

15. If necessary fit a terminal guard (see Section 7.9).

VERTICAL FLUEING

1. Only a flue approved with the Baxi Combi HE Plus

Boiler Range can be used.

2. For information on vertical flues consult the Baxi

Flue Guide Brochure or Notes for Guidance supplied

with the vertical flue pack.

Gasket

Flue Trim

Inner Flue Support Bracket

Flue

Flue Elbow

Fig. 24

Fig. 26

Fig. 25