Quick Start Manual

13.0 Changing Components

13.10 Three-Way Diverter Valve (Head Only)

(Fig. 55)

If only the head needs replacing:

1. Unplug the wiring harness from the 3-way diverter

valve.

2.Depress the clip and revolve the head through 30°

and remove.

3. Fit replacement head and reassemble in reverse

order.

13.11 Three-Way Diverter Valve (Complete)

(Fig. 56)

1. Drain the boiler (see Section 13.1 paragraph 2 & 3).

2. Unplug the wiring harness from the 3-way diverter

valve.

3. Remove the four socket screws retaining the 3-way

valve.

4. Remove the 3-way valve.

5. Fit the new 3-way valve ensuring the gasket is in

place and that the spigots are at the top to fit into the

recesses on the manifold and reassemble in reverse

order.

Fig. 55

Wiring Harness

Fits Here

Fig. 56

Clip

Three-Way

Diverter Valve

Head

Wiring Harness

Fits Here

Three-Way

Diverter Valve

Spigot

Gasket