Assembly Instruction

CAUTION:

Care and Cleaning

Part List and Hardware List

PIECE DESCRIPTION PICTURE

QUANTITY

PIECE

DESCRIPTION

PICTURE

QUANTITY

Bulb

Mounting bar

Canopy

Chain

Socket sleeve

Read instruction carefully and turn electicity off at main circuit breaker panel before

beginning installation.

Do not use any cleaners with chemical,solvents or harsh abrasives.Use Only a dry soft cloth

to dust or wipe carefully.

Estimated Assembly Time: 30 minutes

Mounting screw

To clean the outside fo the fixture,use a dry or slightly dampened clean cloth(use clean

water,never a solvent)to wipe the surface of the fixture.

To clear the inside of the fixture,first disconnect power to the fixture by turning off the circuit

breaker or by removing the fuse at the fuse box.Next,use a dry or slightly damperned clean

cloth(use clean water,never a solvent) to wipe the

interior surface of the fixture

Out ring

Lock

Center tube

Wood

dropper

Wire Nut

Lampbody

Spanner

Lock

Metal

cover

Assembly Instruction

PAGE 1
Assembly Instruction CAUTION: Read instruction carefully and turn electicity off at main circuit breaker panel before beginning installation. Care and Cleaning To clean the outside fo the fixture,use a dry or slightly dampened clean cloth(use clean water,never a solvent)to wipe the surface of the fixture. To clear the inside of the fixture,first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box.
PAGE 2
Installation Step 1 Unpack all parts from cartons carefully Screw the chain(E) to the lock( C ) of the center tube & canopy(F) Thread one end of center tube(F)to the fixture(H) and screw by spanner(L) Thread metal cover(G) to another end of center tube(F) and tighten with lock(C1) Place socket sleeve(I) and bulb(J) to the socket Hanging wood dropper(G) to the hook of metal cover （G1）and hook of the fixture(H) Step 2 Wire Connetion Connect,Hot,Black or Red outlet Supply Wire to: Connect,Neutral,White Outl