- NETGEAR Modem Router Reference Guide

2 Index
D
default configuration, restoring 10-6
Default Dial-in Setup menu
6-1
Destination field, TCP/IP Filter Rule menu
8-5
Destination IP Address field, Edit IP Static Route
menu
7-5
devices, connecting
2-8
DHCP
1-3
,
1-14
,
3-10
DHCP Setup field, Ethernet Setup menu
3-10
Diagnostic menu
9-6
Dial-in User Setup menu
6-4
dial-in users
6-1
Direction field, Modem Setup menu
3-7
domain name server, using
1-13
Drop Modem field, System Maintenance
Diagnostic menu
9-6
Dynamic Host Configuration Protocol. See
DHCP
dynamic NAT. See network address translation
E
Edit Dial-in User menu 6-4
Edit IP field, Remote Node Profile menu
7-2
Edit IP Options field, Remote Node Profile
menu
5-3
Edit IP Static Route menu
7-5
Edit PPP Options field, Remote Node Profile
menu
5-3
Encapsulation field, Remote Node PPP Options
menu
5-4
EPROM, for firmware upgrade
1-3
error log
9-4
Ethernet Address field, System Maintenance
Status menu
9-2
Ethernet field, System Maintenance Status menu
9-2
Ethernet Setup menu
3-10
F
features 1-1
Filter Rules Summary menu
8-3
,
8-7
filter type, Generic IP
8-3
filtering process, example
8-1
filters
configuring
8-1
for reducing Windows 95 calls
8-9
FirstGear
description
1-2
for configuration
1-4
,
3-1
front panel
2-5
G
Gateway IP Address field, Edit IP Static Route
menu
7-5
General Setup menu
3-6
Generic Filter Rule menu
8-7
H
Hang Up B2 Call field, Diagnostic menu 9-6
hub ports, connecting
2-8
I
Idle Time-out field, Edit Dial-in User 6-4
Incoming field, Remote Node Profile menu
5-2
Input and Output Filter Sets field, General Setup
menu
3-9
installation
1-2
Internet Setup test
9-7
Internet, accessing
4-2
IP Addr (destination) field, TCP/IP Filter Rule
menu
8-5
IP Addr (source) field, TCP/IP Filter Rule menu
8-5
IP Address Supplied By field, Default Dial-in
Setup
6-3