- NETGEAR Modem Router Reference Guide

Index 3
IP addresses
and NAT
1-12
and the Internet
1-6
assigning
1-6
,
4-1
masquerading
1-3
private
1-11
IP configuration, by DHCP
1-14
IP Mask (destination) field, TCP/IP Filter Rule
menu
8-5
IP Mask (source) field, TCP/IP Filter Rule menu
8-5
IP Protocol field, TCP/IP Filter Rule menu
8-5
IP Source Route field, TCP/IP Filter Rule menu
8-5
IP Subnet Mask field, Edit IP Static Route menu
7-5
ISP Connection, troubleshooting
10-4
L
LAN Packet Which Triggered Last Call field,
System Maintenance Status menu
9-2
LEDs
description
2-6
troubleshooting
10-1
Length field, Generic Filter Rule menu
8-7
line port, connecting
2-7
log
9-3
Log and Trace menu
9-4
Log Facility field, Syslog and Accounting menu
9-5
Log field
Generic Filter Rule menu
8-8
TCP/IP Filter Rule menu
8-6
M
Macintosh, using to configure 1-4
,
2-9
,
3-1
manager interface
accessing through serial port
2-9
accessing through Telnet
2-9
commands
3-3
menus
3-5
troubleshooting
10-5
using for configuring
1-2
,
1-4
,
2-9
,
3-1
manager interface menus
Advanced Modem setup
3-8
Change Password
3-12
Default Dial-in Setup
6-1
Diagnostic
9-6
Dial-in User Setup
6-4
Edit Dial-in User
6-4
Edit IP Static Route
7-5
Ethernet Setup Menu
3-10
Filter Rules Summary
8-3
,
8-7
General Setup Menu
3-6
Generic Filter Rule
8-7
Internet Access Setup
4-2
Log and Trace
9-3
Main
3-4
Modem Setup
3-7
Remote Node Network Layer Options
7-3
Remote Node PPP Options
5-4
Remote Node Profile
5-1
,
7-2
Remote Node Setup
5-1
Static Route Setup
7-4
Syslog and Accounting
9-4
System Password
3-12
System Status
9-1
TCP/IP Filter Rule
8-4
manager password setup
3-12
Manual Call field, Diagnostic menu
9-6
Manual Call test
9-7
Mask field, Generic Filter Rule menu
8-7