Owner`s manual

position.

11.2V71 STATUS

By responding to the Enter Request: message at the

end of the main configuration menu (see Section 11.1)

with "1" (Status), you can review the current

configuration of the V71. The V71 will respond with:

---------------------------------------------------------------

---------------------------------------------------------------

| 1 | 9600 | 8 | 1 |None | Off | Off | EIA-232 |

---------------------------------------------------------------

Port Select Code is:$BT

Unit Number is : 1

Strike any key to continue

DAC V71 Rev. X.XX

This Module is 1

1) Status

2) Port Select Code

3) Serial Port Configuration

X) Exit Configuration

Enter Request :

You can now make whatever changes are necessary by responding to the above menu. The "X"

(Exit Configuration) will return you to the operations mode.

11.3 V71 PORT SELECT CODE

By responding to the Enter Request: message at the end of the main configuration menu (see

Section 11.1) with "2" (Port Select Code), you can change the port select code to any ASCII

character string from 1 to 8 characters. The V71 will respond with:

Port Select Code is:$BT

Enter Port Select Code (Max. 8 Characters)

and ENTER when done: