Owner`s manual

Type the desired port select code followed by <ENTER>.

For example, if you type #PORT followed by <ENTER>,

the V71 will respond with:

Port Select Code is:#PORT

Enter Port Select Code (Max. 8 Characters)

and ENTER when done:

If no additional change is desired, type <ENTER>. The

V71 saves the new port select code permanently in the

non-volatile memory and return to the main

configuration menu (see Section 11.1).

NOTE: You cannot program the port select code to be

$BAYTECH from the service port. If you wish to use

$BAYTECH as the port select code, you must program

the port select code from the V71 host module.