Owner`s manual
98
11.4V71 SERIAL PORT CONFIGURATION
By responding to the Enter Request: message at the
end of the main configuration menu (see Section 11.1)
with "3" (Set Serial Port Configuration), you can change
the serial configuration for V71 (i.e., baud rate, word
size, stop bits, parity, and XON/XOFF handshaking, and
line interface). V71 will respond with:
---------------------------------------------------------------
| Port | Baud | Word | Stop |Parity| Xon / Xoff | Line |
| | Rate | Size | Bits | | Xmit | Recv | Interface |
---------------------------------------------------------------
| 1 | 9600 | 8 | 1 |None | Off | Off | EIA-232 |
---------------------------------------------------------------
Exit/Save......1 Set Stop Bits..4 Set Line Interface..7
Set Baud Rate..2 Set Parity.....5
Set Word Size..3 Set XON/XOFF...6
Enter Request :
You can now reconfigure the V71 by selecting the
appropriate option from the menu (1 to 7). For
example, to change the baud rate to 115.2K baud, send
"2" (Set baud rate). The V71 will respond with this
menu:
1 for 50
2 for 75
3 for 110
4 for 135
5 for 150
6 for 300
7 for 600
8 for 1200
9 for 2400
A for 4800
B for 9600
C for 19200
D for 38400
E for 57600
F for 76800
G for 115.2K
Enter Request :