Owner`s manual

100

---------------------------------------------------------------

---------------------------------------------------------------

| 1 |115200 | 8 | 1 |None | Off | Off | EIA-232 |

---------------------------------------------------------------

Exit/Save......1 Set Stop Bits..4 Set Line Interface..7

Set Baud Rate..2 Set Parity.....5

Set Word Size..3 Set XON/XOFF...6

Enter Request :

You can now select other options from the menu. For

example, to change the line interface to EIA-422, type

"7" (Set Line Interface) and the V71 will respond with:

1 for EIA-232

2 for EIA-422

3 for 20mA Current Loop

Enter Request :

Type "2" for EIA-422 line interface and the V71 will

respond with the reconfigured status of the port, the

option menu, and the prompt:

---------------------------------------------------------------

---------------------------------------------------------------

| 1 |115200 | 8 | 1 |None | Off | Off | EIA-422 |

---------------------------------------------------------------

Exit/Save......1 Set Stop Bits..4 Set Line Interface..7

Set Baud Rate..2 Set Parity.....5

Set Word Size..3 Set XON/XOFF...6

Enter Request :

If there are no other changes, send "1" (Exit/Save) and

the V71 will return to the main configuration menu (see

Section 11.1).

NOTE: The new serial port configuration changes do not

take effect until after you exit configuration mode for

the V71.