Owner`s manual

132
designated host device in a round-robin fashion.
15.1.7 V50/V73/V74/V75/V76/V86/V87
TIME TAG
The module can be programmed to provide a time tag in
immediate or command operation mode. A time tag
provides the month, day, year, hour, minute, and second
the message or block of data was recorded according to
the M Series main unit's time-of-day clock. The time
tag is inserted after the port identification code if
enabled.
The time tag can appear in one of four formats: 1)
HH:MM:SS, 2) HH:MM:SS:mmm, 3) MM/DD/YY
HH:MM:SS, or 4) MM/DD/YY/ HH:MM:SS mmm where HH:
is the hour, MM: is the minute, SS is the second, mmm
is the millisecond, MM/ is the month, DD/ is the day,
and YY is the year of the M-Series time-of-day clock.
If you type "8" from the main configuration menu of the
peripheral communications module (Time Tag Mode), the
module will respond with:
Current Time Tag Mode is..................Disabled
Disabled .................................1
Time: HH:MM:SS...........................2
Time: HH:MM:SS mmm.......................3
Date/Time: MM/DD/YY HH:MM:SS.............4
Date/Time: MM/DD/YY HH:MM:SS mmm.........5
Exit......................................x
Enter Selection
Type the selection corresponding to your desired choice.