Owner`s manual

147
installed modules resetting.
16.2V50/V73/V74/V75/V76/V86/V87
STATUS
By responding to the Enter Request: Message at the end
of the main configuration menu (see Section 16.1) with
"1" (Status), you can review the current configuration
status. The module will respond with:
Current Terminate Character is.............0DH
Current Host Designation is Module.........1
Current Mode of Operation is...............1
Strike any Key to Continue, or X to Exit
Current Module 2 Serial Port Configuration :
+------+------------------+-------+------+------+------+------+------+
| Port | Device Name | Baud | Word | Stop |Parity| Xon / Xoff |
| | | Rate | Size | Bits | | Xmit | Recv |
+------+------------------+-------+------+------+------+------+------+
| 1 | Device A | 9600 | 8 | 1 | None | Off | Off |
| 2 | Device B | 9600 | 8 | 1 | None | Off | Off |
| 3 | Device C | 9600 | 8 | 1 | None | Off | Off |
| 4 | Device D | 9600 | 8 | 1 | None | Off | Off |
+------+------------------+-------+------+------+------+------+------+
Strike any Key to Continue, or X to Exit
Current Module 2 Port I.D :
+------+------------------+
| Port | Port I.D |
+------+------------------+
| 1 | 01:02,1 |
| 2 | 01:02,2 |
| 3 | 01:02,3 |
| 4 | 01:02,4 |
+------+------------------+
Strike any Key to Continue, or X to Exit
Copyright(C) Bay Technical Associates 199X-199X
Model V73/V74/V76 etc. High Speed Serial 4C
Revision F. X.XX
Unit: 1, Module: 2
Status.....................................1
Serial Port Configuration..................2
Port Device Name...........................3