Owner`s manual

149
+------+------------------+-------+------+------+------+------+------+
Exit/Save......1 Set Stop Bits.....4
Set Baud Rate..2 Set Parity........5
Set Word Size..3 Set Xon/Xoff......6
Enter Request:
You can now reconfigure Port 4 by selecting the
appropriate option from the menu (1 to 6). For
example, to change the baud rate to 115.2K baud, send
"2" (Set baud rate). The module will respond with this
menu:
1 For 300
2 For 600
3 For 1200
4 For 2400
5 For 4800
6 For 9600
7 For 19200
8 For 38400
9 For 76.8K
A For 115.2K
Enter Request :
Send "A" for 115.2K baud rate, and the module will
respond with the reconfigured status of the port, the
option menu, and the prompt:
Current Module 1 Serial Port Configuration :
+------+------------------+-------+------+------+------+------+------+
| Port | Device Name | Baud | Word | Stop |Parity| Xon / Xoff |
| | | Rate | Size | Bits | | Xmit | Recv |
+------+------------------+-------+------+------+------+------+------+
| 4 | Device D | 115.2K| 8 | 1 | None | Off | Off |
+------+------------------+-------+------+------+------+------+------+
Exit/Save......1 Set Stop Bits.....4
Set Baud Rate..2 Set Parity........5
Set Word Size..3 Set Xon/Xoff......6
Enter Request:
You can now select other options from the menu to
reconfigure Port 4. For example, to enable Xon/Xoff
handshaking in the receive data direction only, send "6"
(Set Xon/Xoff Xmit) in response to the prompt. The