Owner`s manual

152

+------+------------------+-------+------+------+------+------+------+

+------+------------------+-------+------+------+------+------+------+

| 4 | PORT 4 | 115.2K| 8 | 1 | None | Off | On |

+------+------------------+-------+------+------+------+------+------+

Enter Port Device Name (Max. 16 characters)

or ENTER for no change ...................:

If the port device name is satisfactory, type <ENTER>

and the will respond with:

Enter Port Number (? = Help, ENTER = Exit) :

Enter the number of any other port you wish to

reconfigure. If there are no other ports, type <ENTER>

and the module will return the main configuration menu

(see Section 16.1).

16.5V50/V73/V74/V75/V76/V86/V87 PORT

By responding to the Enter Request: message at the

end of the main configuration menu (see Section 16.1)

with "4" (Port ID), you can program the format of the

port identification code that precedes messages or data

sent to the host computer while operating in immediate

or command reporting modes. This format can either

UU:MM,PP or the device name of the I/O port that

received the message where UU is the Unit Number, MM

is the Module Number, and PP is the Port Number. The

module will respond with:

Enter Port Number (? = Help, ENTER = Exit) :

Type the desired port number followed by <ENTER> or

<ENTER> to exit back to the main configuration menu.

For example, if you type "1" followed by <ENTER> for

Port 1, the I/O module responds with:

Current Module 3 Port I.D :

+------+------------------+

| Port | Port I.D |