Owner`s manual

155
<ENTER> and the module will now return to the main
configuration menu (see Section 16.1).
16.8V50/V73/V74/V75/V76/V86/V87
CHANGE MODE OF OPERATION
By responding to the Enter Request: message at the
end of the main configuration menu (see Section 16.1)
with "7" (Change Mode of Operation), you can change
the current mode of operation. The module will respond
with:
MODE OF OPERATION
Full Duplex Mode............................1
Immediate Message Mode......................2
Command Mode................................3
Immediate Data Mode.........................4
Current Mode of Operation is............... 1
Enter Mode of Operation :
You can now enter the mode of operation that you wish.
The module will then return to the main configuration
menu (see Section 16.1).
16.9V50/V73/V74/V75/V76/V86/V87 TIME
TAG MODE
By responding to the Enter Request: message at the
end of the main configuration menu (see Section 16.1)
with "8" (Time Tag Mode), you can enable or disable
time tag. The module will respond with:
Current Time Tag Mode is ..................Disabled
Enable.....................................1
Disable....................................2
Exit.......................................X
Enter Selection:
Type the appropriate number to enable or disable time