Owner`s manual

160
the module returns to operation mode.
If you change the Message Terminate Character or Mode
of Operation from the front panel, the module will
respond with:

Mode Of Operation or
Terminate Character 
Changed ! Press Any 
Key To Reset Unit...

Typing any key results in the M Series base unit and all
installed modules resetting.
17 MAINTENANCE
Since there are no adjustments and no moving parts in
the M Series, preventative maintenance is unnecessary.
17.1RETURNS TO THE FACTORY
If you find it necessary to return any component of the
M Series system to the factory for warranty work or
factory-set changes, follow the procedure listed under
Section 17.2 for repacking. Before you ship your unit,
please call BayTech to get a Return Authorization
number. BayTech cannot accept warranty or no-charge
returns without this number. Ship your unit to the
address listed in Section 18, - Technical Support.
17.2REPACKING FOR SHIPPING
If you need to repack your unit for shipping, please
choose a heavy cardboard box for packing. Surround
your unit with sufficient insulation (a minimum of