Owner`s manual

170
5. Hold the memory expansion module in your
hand so the card edge connector is facing
down.
IMPORTANT: Pin 1 of the memory module is
marked and should be positioned to the left of the
module as referenced in Appendix D.3.
WARNING: If module is plugged in backwards, it
will be damaged and become inoperable.
6. Line up the connector of the memory
expansion module with the socket. Push
down on the memory expansion module until
it is firmly seated in the socket.
7. If a memory expansion module needs to be
removed, pull straight up and away from the
socket.
8. Once memory expansion has been
completed, you can install the M03 memory
module into the unit chassis. Apply power
to the unit. The upgrade is now complete.
9. To verify memory upgrade, enter the
configuration mode of a V71 host module.
The installed memory is displayed in the
main configuration menu.