Owner`s manual

The following example shows messages received using

immediate or schedule reporting where the PDI-1 or

PDI-2 is installed in Unit 1 Module 15 with Time Tagging

enabled:

1:15,1 1 11/18/97 09:12:22<cr><lf>

1:15,2 1 11/18/97 09:12:22<cr><lf>

where 1:15,1 represents Unit 1/Module 15/Channel 1,

1:15,2 represents Unit 1/Module 15/Channel 2, 1

indicates that Channel #1 and Channel #2 are closed,

11/18/97 09:12:22 is the time tag which is the same

for both channels in this example, and <cr><lf> is the

Carriage Return and Line Feed terminating characters.

The following examples show the messages received

using command reporting where the PDI-1 or PDI-2 is

installed in Unit 1 Module 15 with time tagging enabled.

If you select the module and issue the RD1<cr>

command (Report Event Duration), the module responds

with a single message showing the Event Duration for

Channel 1 similar to the following:

1:15,1 1320 11/18/97 09:12:22

where 1:15,1 represents Unit 1/Module 15/Channel 1,

1320 indicates the event duration is 1320 milliseconds,

and 11/18/97 09:12:22 is the time tag.

If you issue the RC1<cr> command (Report Event

Counter), the module responds with a message showing

the Event Counter similar to the following:

1:15,1 823 11/18/97 09:12:22

where 1:15,1 represents Unit 1/Module 15/Channel 1,

823 indicates the number of recorded events is 823

times, and 11/18/97 09:12:22 is the time tag.