Owner`s manual

4 BASE UNIT INSTALLATION

4.1 UNPACKING

After opening the box, check the packing list that comes

with the M Series to ensure that you have received all

components. At a minimum you should have received

the unit, this manual with any applicable addendums

and separate manuals for the I/O modules, and a

software utility diskette. The M3, M4, M6 and M9 are

provided with an external AC power adapter. Check the

unit to make certain that it did not incur damage during

shipping. If items are missing or damage did occur,

please contact BayTech technical support at 800-523-

2702.

4.2 SOFTWARE UTILITY DISKETTE

IMPORTANT: Copy the BayTech original diskette onto

a blank diskette and store the original in a safe place.

BayTech provides utility software for DOS compatible

PCs to assist you in configuring your M Series unit. This

diskette contains the following programs:

REMCONFG.COD, SMODE.EXE, TERM.EXE and

README.RDM. The M Series does not utilize the

REMCONFG.COD file. TERM.EXE is a terminal emulation

program for DOS compatible PCs used to configure the

various features of the unit. SMODE.EXE is a program

used to configure COM ports of DOS compatible

machines to operate at speeds faster than 9600 bps.

Please review the README.RDM file to obtain

instructions for TERM.EXE and SMODE.EXE. To view the

README.RDM file on your screen, first insert the