Owner`s manual

60
module selects Port 1 of a V74 module, the LED for Port
1 of the V71 module and Port 1 of the V74 module will
illuminate. If a V71 host module places a V74 module
into configuration mode, all LEDs for the V74 module
and Port 1 of the V71 host module will illuminate.
Units equipped with LEDs have two LEDs for the service
modem and a single LED for the EIA-232 service port.
When the CX LED is illuminated for the service modem
or service port, this indicates the connected device has
selected the main board or an installed module. When
a connection is established between a remote modem
and the service modem, the CD LED for the service
modem will illuminate.
6 BASE UNIT CONFIGURATION
The base unit can be configured from the front panel for
units equipped with LCD and control panel, the service
port, the service modem, or a host control module.
Section 6.1 discusses front panel configuration and
Section 6.2 discusses configuration from the service
port, service modem, and host communications module.
NOTE: Once the date has been programmed, the base
unit will automatically adjust for months having 28, 29,
30, or 31 days for all years up to 1999. The base unit
also tracks the correct day of the week automatically.