Owner`s manual

Enter the desired selection. The "X" selection (Exit

System Menu) will return you to operations mode. Once

you exit configuration mode, you should disconnect by

sending $BT<cr> if configuring from the V71 host

module or $BT<cr> if configuring from the service port

or service modem. (Use $BAYTECH<cr> when using M4

and M8 DAC).

SET DATE

If you type "1" from the menu above (Set Date), you will

receive the following menu:

Enter date <MM/DD/YY>:

Type the desired date. For example, to enter December

31, 1999, you would type 12/31/99.

SET TIME

If you type "2" from the menu above (Set Time), you will

receive the following menu:

Enter time <HH:MM:SS>:

Type the desired time. For example, to enter 11:59:59,

you would type 11:59:59.

SET UNIT NUMBER

If you type "3" from the menu above (Set Unit Number),

you will receive the following menu:

Enter unit (1-30):

Type the desired Unit Number.