If you have any questions contact the SAS Technical Support Department at: Phone - (504) 272 7135 Fax - (504) 272-9844 Email - tech@sasbazooka.com Website - www.sasbazooka.com In Canada: (604) 988 2966 15049 Florida Blvd., Baton Rouge, LA.
CONGRATULATIONS Dear Friend, TECHNICAL NOTE CONT. Phase Correcting Procedure Thank you for selecting Bazooka® subwoofer speaker systems for your car stereo system. The Bazooka Reference Series represents SAS‘s continued commitment to efficiency and design. An innovative manufacturing process developed by SAS for the Bazooka provides consumers with state-of-the-art speaker system design.
BAZOOKA POWER HOOK UP On the back of all Bazooka Reference Series passive models you will find a terminal cup with two 5 way gold binding posts, red being positive and black being negative. Hook the positive speaker output from your amplifier to the red positive terminal of the Bazooka. Hook the negative speaker output from your amplifier to the black negative terminal. Repeat these steps for each Bazooka used. CONTENTS System Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SYSTEM FEATURES MOUNTING THE BAZOOKA 6.5”, 8”, or 10” PURE-PISTON WOOFER TURBO COOLED VOICE COILS BASS REFLEX, DUCTED PORT ENCLOSURE CORNER LOADING COPLANAR OUTPUT HIGH OUTPUT EFFICIENCY MOISTURE RESISTANT ENCLOSURE AND WOOFER 5 WAY GOLD BINDING POST WIRE TERMINALS MAXIMIZED SPACE EFFICIENCY 2 YEAR WARRANTY LARGE MAGNET FOR INCREASED POWER HANDLING See Model Size For Length Figure 9 SPECIFICATIONS RS604/608 RS804/808 RS104/108 6.5“ 8“ 10“ Voice Coil Size 1.
INSTALLATION MOUNTING THE BAZOOKA 3. Place each mounting base under the Bazooka so that the apex at the bottom of the tube sits inside the mounting base as in figure7. Figure 7 4. Move the bases so that they are spaced approximately 3” from each end of the enclosure as illustrated in figure 8. ,, 3 5. Remove the Bazooka without moving the mounting bases and set it aside. ,, 3 6. Screw each mounting base securely in place with screws provided as illustrated in figure 6.
INSTALLATION MOUNTING THE BAZOOKA TRUCK INSTALLATION 1. With the top side of the buckle facing up (see figure 4), lace the strap through the mounting base as illustrated in figure 5. Figure 1 Figure 4 tube size is exagerated for emphasis Bottom Top SEDAN INSTALLATION Figure 2 Figure 5 tube size is exagerated for emphasis 2. After the strap is completely laced through the mounting base, make a loop with the strap, where it runs across the middle of the base as illustrated in figure 6.
INSTALLATION MOUNTING THE BAZOOKA TRUCK INSTALLATION 1. With the top side of the buckle facing up (see figure 4), lace the strap through the mounting base as illustrated in figure 5. Figure 1 Figure 4 tube size is exagerated for emphasis Bottom Top SEDAN INSTALLATION Figure 2 Figure 5 tube size is exagerated for emphasis 2. After the strap is completely laced through the mounting base, make a loop with the strap, where it runs across the middle of the base as illustrated in figure 6.
INSTALLATION MOUNTING THE BAZOOKA 3. Place each mounting base under the Bazooka so that the apex at the bottom of the tube sits inside the mounting base as in figure7. Figure 7 4. Move the bases so that they are spaced approximately 3” from each end of the enclosure as illustrated in figure 8. ,, 3 5. Remove the Bazooka without moving the mounting bases and set it aside. ,, 3 6. Screw each mounting base securely in place with screws provided as illustrated in figure 6.
SYSTEM FEATURES MOUNTING THE BAZOOKA 6.5”, 8”, or 10” PURE-PISTON WOOFER TURBO COOLED VOICE COILS BASS REFLEX, DUCTED PORT ENCLOSURE CORNER LOADING COPLANAR OUTPUT HIGH OUTPUT EFFICIENCY MOISTURE RESISTANT ENCLOSURE AND WOOFER 5 WAY GOLD BINDING POST WIRE TERMINALS MAXIMIZED SPACE EFFICIENCY 2 YEAR WARRANTY LARGE MAGNET FOR INCREASED POWER HANDLING See Model Size For Length Figure 9 SPECIFICATIONS RS604/608 RS804/808 RS104/108 6.5“ 8“ 10“ Voice Coil Size 1.
BAZOOKA POWER HOOK UP On the back of all Bazooka Reference Series passive models you will find a terminal cup with two 5 way gold binding posts, red being positive and black being negative. Hook the positive speaker output from your amplifier to the red positive terminal of the Bazooka. Hook the negative speaker output from your amplifier to the black negative terminal. Repeat these steps for each Bazooka used. CONTENTS System Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CONGRATULATIONS Dear Friend, TECHNICAL NOTE CONT. Phase Correcting Procedure Thank you for selecting Bazooka® subwoofer speaker systems for your car stereo system. The Bazooka Reference Series represents SAS‘s continued commitment to efficiency and design. An innovative manufacturing process developed by SAS for the Bazooka provides consumers with state-of-the-art speaker system design.
If you have any questions contact the SAS Technical Support Department at: Phone - (504) 272 7135 Fax - (504) 272-9844 Email - tech@sasbazooka.com Website - www.sasbazooka.com In Canada: (604) 988 2966 15049 Florida Blvd., Baton Rouge, LA.