User`s manual

3-19
BIOS Setup
Boot Device Priority
1st Boot Device
The items allow you to set the sequence of boot devices where BIOS attempts
to load the disk operating system. First press <Enter> to enter the sub-menu.
Then you may use the arrow keys ( ↑↓ ) to select the desired device, then
press <+>, <-> or <PageUp>, <PageDown> key to move it up/down in the
priority list.
Flash Write Protection
Select [Enabled] if you need to program data into the flash chip.
Select [Disabled] if you need to protect the data from being overwritten.
Chassis Instruction
Select [Enabled] to enable the chassis instruction function.
Select [Disabled] to disable the chassis instruction function.
Select [Reset] to clear the chassis instruction status.
ture" Interrupt 19. Therefore, you will not be able to boot operating systems
from any bootable disks attached to these host adaptors. Nor will you be able to
gain access to their ROM setup utilities.