User`s manual

(5) Reset switch lead: RESET

This 2-pin connector connects to the case-mounted reset switch for rebooting your

computer without having to turn off your power switch. This is a preferred method of

rebooting in order to prolong the lift of the system’s power supply. See the figure below.

(6) Speaker connector: SPEAKER

This 4-pin connector connects to the case-mounted speaker. See the figure below.

(7) Power LED: PWR LED

The Power LED is light on while the system power is on. Connect the Power LED from

the system case to this pin.

(8) Power switch: PWR BTN

This 2-pin connector connects to the case-mounted power switch to power ON/OFF the

system.

System Case Connections

SPEAKER

SPKR

VCC5

Pin 1

HDLED

RESET

VCC3

GND

VCC3

PWR LED

PWRBT

VCC5SB

GND

HDDLE

RSTSW

PANSWIN

Pin 1

(9) Wake On-LAN Headers (3-pin) : WOL

This connector connects to a LAN card with a WAKE ON-LAN output. This connector

power up the system when a wake up signal is received through the LAN card.

NOTE:

This feature requires that Wake On LAN or Ring In Wake up is enabled.

3 WOL

2 GND

1 5VSB

Wake-On-LAN Headers

WOL