User`s manual

27
First/Second/Third/Fourth Boot Device
The BIOS attempts to load the operating system from the devices in the sequence selected in
these items. The settings are Floppy, LS/ZIP, HDD-0/HDD-1/HDD-3, SCSI, CDROM, LAD
and Disabled.
Power Up NumLock Status
The default value is On.
On
(default) Keypad is numeric keys.
Off
Keypad is arrow keys.
Power Up Floppy Seek
During POST, BIOS will determine if the floppy disk drive installed is 40 or 80 tracks. 360K
type is 40 tracks while 760K, 1.2M and 1.44M are all 80 tracks.
Select Primary VGA
Select which VGA device to be the primary display. The available selection are GFX/ AGP or
PCI.
Boot Sector Protection
Enabling boot sector protection will disallow software to write to the boot sector and the
partition table of the hard drive.
Password Required On
If password is enabled and a supervisor password is entered, supervisor password is required
at selected option. The selection are Disable, Boot & Setup, Setup Only.