User`s manual

Select an address and corresponding interrupt for the first and the second serial ports. The

settings are: 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled, Auto.

UART2 Mode

This item allows you to determine which InfraRed(IR) function of the onboard I/O chip, this

functions uses.

Parallel Port

There is a built-in parallel port on the on-board Super I/O chipset that Provides Standard, ECP,

and EPP features. It has the following option:

Disabled

(3BCH/IRQ7)/

Line Printer port 0

(278H/IRQ5)/

Line Printer port 2

(378H/IRQ7)

Line Printer port 1

Parallel Port Mode

SPP : Standard Parallel Port

EPP : Enhanced Parallel Port

ECP : Extended Capability Port

SPP/EPP/ECP/ECP+EPP

To operate the onboard parallel port as Standard Parallel Port only, choose “SPP.” To

operate the onboard parallel port in the EPP modes simultaneously, choose “EPP.” By

choosing “ECP”, the onboard parallel port will operate in ECP mode only. Choosing

“ECP+EPP” will allow the onboard parallel port to support both the ECP and EPP modes

simultaneously. The ECP mode has to use the DMA channel, so choose the onboard

parallel port with the ECP feature. After selecting it, the following message will appear:

“ECP Mode Use DMA” at this time, the user can choose between DMA channels 3 to 1.

The onboard parallel port is EPP Spec. compliant, so after the user chooses the onboard

parallel port with the EPP function, the following message will be displayed on the screen:

“EPP Mode Select.” At this time either EPP 1.7 spec. or EPP 1.9 spec. can be chosen.

Onboard USB Controller

Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have a

USB peripherals. The settings are: Enabled, Disabled.

USB Legacy Support

Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have a

USB keyboard. The settings are: Enabled, Disabled

USB Disk Emulation

Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have a

USB Disk. The settings are: Enabled, Disabled

Game Port Address/Midi Port Address

This selection allow you to Enabled, Disabled, select which Address and IRQ for the Game

Port/Midi Port will be used.