User`s manual

Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off state. The

settings are: Delay 4 Sec, Instant-Off.

Modem Use IRQ

This determines the IRQ in which the MODEM can use.

The settings are: 3, 4, 5, 7, 9, 10, 11, NA.

Wake On PME

When enabled, BIOS will enable PCI devices to drive PME signal to wake up the system.

Wake On RI

When enabled, an input signal from the ring indicator line will awaken the system from soft-off state.

Wake Up on RTC Alarm

This function is for setting date and time for your computer to boot up. During Disabled, you cannot

use this function. During Enabled, choose the Date and Time Alarm:

Date(of month) Alarm

You can choose which month the system will boot up. Set to 0, to boot every day.

Time(hh:mm:ss) Alarm

You can choose what hour, minute and second the system will boot up.

Note: If you have change the setting, you must let the system boot up until it goes to the

operating system, before this function will work

Power On After Power Loss

Power on resume state after power failure.