User`s manual

3-9 PCI PnP Configuration

Whizpro BIOS SETUP Utility

PnP OS Installed : Yes

Reset Configure Data : No

PCI VGA Palette Snoop : Disabled

Reserved ISA Memory Space

C800-CC00: No

CC00-D000: No

D000-D400: No

D400-D800: No

D800-DC00: No

DC00-E000: No

IRQ Reserved to ISA Device

IRQ: None

↑↓

: Select a menu

ENTER : enter a menu

ESC : quit & exit

F9 : load default CMOS settings

F10 : save settings and exit

Reset Configuration Data

Normally, you leave this field Disabled. Select Enabled to reset Extended System Configuration

Data (ESCD) when you exit Setup if you have installed a new add-on and the system

reconfiguration has caused such a serious conflict that the operating system can not boot. The

settings are: Enabled and Disabled.

PCI/VGA Palette Snoop

Leave this field at Disabled. The settings are Enabled, Disabled.

Reserve ISA Memory Space

ISA Memory reservation.

IRQ Resources

When resources are controlled manually, assign each system interrupt a type, depending on the

type of device using the interrupt.

PCI & PnP