User`s manual

3-10 Hardware Monitor

This section shows the Status of you CPU, Fan, Warning for overall system status. This is

only available if there is Hardware Monitor onboard.

Whizpro BIOS SETUP Utility

Chassis Intrusion Detect: Disabled

CPU Voltage :

FSB Voltage :

3.3

Volt :

5.0

Volt :

12.0 Volt :

-12.0 Volt :

-5.0 Volt :

CPU Fan Rotation:

System Fan Rotation:

System Fan 2 Rotation:

CPU Temperature :

System 1 Temperature :

↑↓

: Select a menu

ENTER : enter a menu

ESC : quit & exit

F9 : load default CMOS settings

F10 : save settings and exit

Chassis Intrusion Detect

Enable/ Disable chassis intrusion detection.

Current CPU Temperature/Current System Temp/Current FAN1, FAN2 Speed/Vcore/

Vdd/3.3V/+5V/+12V/-12V/VBAT(V)/5VSB(V)

This will show the CPU/FAN/System voltage chart and FAN Speed.

Hardware Monitor