Owner's Manual

ManualsBrandsBDI ManualsEntertainment FurnitureCorridor Bar 5620

Product Registration

Registering your new BDI product allows us to send you important

product updates, service information and helpful hints related to your

BDI products. Register today and you will be entered to win free a

BINK table from BDI. www.bdiusa.com/product-registration/

Placement and Maintenance

Corridor

furniture is designed for indoor use on level floors. Clean

glass with glass cleaner, and steel parts and wood veneer with a

moist cloth.

Your Corridor

furniture is engineered for easy assembly. Carefully

follow this procedure to prevent any damage.

Do not use power tools for assembly of this product.

Step 1

Unpack and identify the parts listed below. The assembly

workspace should be a non-marring surface such as carpet. For

missing hardware pieces, please contact BDI Customer Service at

customerservice@bdiusa.com. For all other concerns, please contact

your BDI retailer.

bdiusa.com

customerservice@bdiusa.com

CORRIDOR

5620

COMPACT BAR

A Phillips Screwdriver x 1

These distinctive product conﬁgurations are protected by US and international patents, trade dress, and/or

Made in China. 03.14.2016 V4

B Hex Wrench x 1

D - Cabinet x 1

H Door Pull x 2

C Leveler Wrench x 1

E Metal Leg, Right x 1

F Metal Leg, Left x 1

K Glass Top x 1

J Rubber Bumper x 1

I M4 x 25 mm Screw x 4

L M6 Screw (Silver)

x 4

G 1/4-20 x 15 mm Screw

x 12

Summary of content (4 pages)

PAGE 1
CORRIDOR® 5620 bdiusa.com customerservice@bdiusa.com COMPACT BAR Product Registration Registering your new BDI product allows us to send you important product updates, service information and helpful hints related to your BDI products. Register today and you will be entered to win free a BINK table from BDI. www.bdiusa.com/product-registration/ Placement and Maintenance Corridor® furniture is designed for indoor use on level floors.
PAGE 2
Step 2 - With the Cabinet D on its back, slightly loosen screw attaching metal rail to Cabinet D using Hex Wrench B. Slide tab of Metal Legs E,F into metal rail and attach to cabinet by using Screw G and Hex Wrench B until fully tightened. D E F E G Gx4 Step 3 - Using Screw G, attach Metal Legs E,F to Cabinet D with Hex Wrench B. Do not overtighten. G Gx8 D G G 2 CORRIDOR 5620 COMPACT BAR bdiusa.com customerservice@bdiusa.
PAGE 3
Step 4 - With help from another person, carefully position Cabinet upright and install Door Pulls H using Screw I and Phillips Screwdriver A. Adhere Rubber Bumper J to center of the top of Cabinet D . D Jx1 H I I Hx2 Ix4 Step 5 - Attach Glass Top K to Cabinet D using Screw (silver) L and Hex Wrench B. Do not overtighten. K D L L L Lx4 (Silver) 3 CORRIDOR 5620 COMPACT BAR bdiusa.com customerservice@bdiusa.
PAGE 4
Adjustable Shelf The shelf pins located inside the right compartment may be repositioned using Screwdriver A, allowing you to raise or lower the Adjustable Shelf to the desired level. *Note: Once the unit is completely assembled and in its final position, adjust the levelers using Leveler Wrench C as necessary. If you prefer to have the doors remain in a fully-open position, partially extending the two (2) front levelers is desirable.