Owner's Manual

ManualsBrandsBDI ManualsEntertainment FurnitureCorridor 8172

Product Registration

Registering your new BDI product allows us to send you important

product updates, service information and helpful hints related to

your BDI products. Register today and you will be entered to win

free a BINK table from BDI. www.bdiusa.com/product-registration/

Placement and Maintenance

Corridor

Media furniture is designed for indoor use on level floors.

Clean glass with glass cleaner, and steel parts and wood veneer

with a moist cloth.

Your Corridor

Media furniture is engineered for easy assembly.

Carefully follow this procedure to prevent any damage.

Do not use power tools for assembly of this product.

Step 1

Unpack and identify the parts listed below. The assembly

workspace should be a non-marring surface such as carpet. For

missing hardware pieces, please contact BDI Customer Service

at customerservice@bdiusa.com. For all other concerns, please

contact your BDI retailer.

For your convenience, wheel assembly is pre-installed. Wheels can

be removed if desired.

bdiusa.com

customerservice@bdiusa.com

CORRIDOR

8172

AUDIO TOWER

B1 Hex Wrench x 1

B3 Hex Wrench x 1

Removal of wheels (optional):

Detach Wheel Assembly from

Metal Leg E,F by removing the

Leveler and Screw.

Reinstall Leveler to Metal Leg

E,F .

B2 Hex Wrench x 1

A Phillips Screwdriver x 1

D 1/4-20 x 10 mm

Machine Screw x 12

E Left Leg x 1

F Right Leg x 1

K Back Panel x 1

G Glass Top x 1

L LP Storage Bars x 3

E,F

C Cabinet x 1

H Rubber Bumpers x 4

L Stretcher x 1

M 1/4-20 x 63 mm

Machine Screw x 1

I Large Adjustable Shelf

x 2

J Small Adjustable Shelf

x 1

These distinctive product conﬁgurations are protected by US and international patents, trade dress, and/or

Made in China. 04.22.2016 V5

Summary of content (7 pages)

PAGE 1
CORRIDOR® 8172 AUDIO TOWER bdiusa.com customerservice@bdiusa.com Product Registration Registering your new BDI product allows us to send you important product updates, service information and helpful hints related to your BDI products. Register today and you will be entered to win free a BINK table from BDI. www.bdiusa.com/product-registration/ A Phillips Screwdriver x 1 B1 Hex Wrench x 1 B2 Hex Wrench x 1 Placement and Maintenance Corridor® Media furniture is designed for indoor use on level floors.
PAGE 2
Step 2 - Build Base Assembly Slide tab of Metal Legs E,F into ends of Stretcher L . Connect by using Screw D and Hex Wrench B1. Fully tighten all screws. L D Dx4 E F F Step 3 - Position cabinet on its back. Prop up the bottom edge with a book. Using Screw D , attach Leg Assembly to Cabinet C with Hex Wrench B1 . Do not overtighten. *Note: Each of the metal legs has levelers that can be adjusted using the Hex Wrench B2 . C Dx8 E F 2 CORRIDOR 8172 AUDIO TOWER bdiusa.com customerservice@bdiusa.
PAGE 3
Step 4 - Install Glass Position the cabinet upright and remove paper backing from Rubber Bumpers H and place near corners of the top of the cabinet (within 1” of the edge). Place Glass Top G on top of Cabinet C centered left to right and front to back. G H Space for power strip H H C Hx4 Step 5 - Install Back Panel Install Back Panel K to the backside of the cabinet by inserting top edge in upper channel then tipping bottom edge forward and into lower channel.
PAGE 4
Adjustable Shelves If desired, lift Adjustable Shelf I away, loosen & remove related Shelf Support Pins, reinstall the Shelf Support Pins at desired height, then reinstall Adjustable Shelf. I Ix2 I J Jx1 LP Record Storage This cabinet is designed to store LP Records by placing LP Storage Bars L into designated holes in bottom of Cabinet C . LP Storage Bars L can be stored by placing them in designated holes in back of Cabinet C when not in use (see below) C L 4 CORRIDOR 8172 AUDIO TOWER L bdiusa.
PAGE 5
Reverse Door-Swing if desired The door on the Corridor AV Tower can either hinge left or right. To change sides, remove the screws using a Phillips Screwdriver (A) [OH[ ZLJ\YL [OL OPUNL WSH[LZ [V [OL JHIPUL[ 9V[H[L [OL KVVY á \W ZPKL KV^U and reattach the door with the same screws going into the threaded inserts on the other side of the cabinet as illustrated. A CD's here 5 CORRIDOR 8172 AUDIO TOWER bdiusa.com customerservice@bdiusa.
PAGE 6
Fine tuning your new BDI Corridor Home Theater Furniture These steps are to be followed after you have unpacked and completed the simple assembly instructions for your Corridor AV cabinet. Due to jostling in freight or perhaps an uneven floor, the doors on your Corridor cabinet may not appear to be in perfect alignment. Making a few minor adjustments can rectify this situation. Be aware that depending on your situation, patience and a bit of trial and error are required.
PAGE 7
Door adjustments If your door is not straight, the door can be straightened by adjusting the depth of the set screw found in the middle of the 2 metal bars on the back of the door. Turning the set screws clockwise will push the middle of the door outward. Turning the set screws counterclockwise will push the middle of the door inward. 7 CORRIDOR 8172 AUDIO TOWER bdiusa.com customerservice@bdiusa.