Assembly

ManualsBrandsBDI ManualsTV Stands & Entertainment CentersBDI Arena 9972 Black TV Mount

Your Arena

Flat Panel Mount is engineered for easy

assembly. Carefully follow this procedure to prevent any

damage.

Placement and Maintenance

Arena Flat Panel Mount is designed for indoor use on level

floors. Clean steel parts with a moist cloth.

NOTICE: ARENA PERFORMS BEST AGAINST OR NEAR A

WALL.

Step 1

Unpack and identify the components at left. The assembly

workspace should be a non-marring surface such as carpet.

For missing hardware pieces, please contact BDI Customer

Service at customerservice@bdiusa.com. For all other

concerns, please contact your BDI Retailer.

Step 2

Assemble Base

Screw in Levelers (N) into C-Leg (M). Attach Base Forks

(O) to C-Leg (M) using provided Allen Wrench (A), six

(6) 5/16 x 5/8 in Screws (B), and four (4) 5/16 x 1 in

Screws (P).

A r e n A

9972

Component List

These distinctive product congurations are protected by US and

international patents, trade dress, and/or copyright laws.

BDI are trademarks of Becker Designed, Inc.

Made in China. 082609v2

a s s e m b l y i n s t r u c t i o n s

b d i u s a .c o m c u s t o m e r s e r v i c e @b d i u s a .c o m

C - Spine x 1

F - Horizontal Mounting

Bracket

x 1

I - Vertical Mounting

Bracket

x 2

J - TV Mounting Kit

x 1

E - 5/16 x 1 3/4 in

Screws

x 4

D - Swiveling Bracket

Assembly

x 2

G - 5/16 x 3/8 in

Screws

x 4

A - 5mm Allen Wrench

x 1

H - Washer x 4

L - Jam Nut x 2

K - Leveling Disc x 2

P - 5/16 X 1 in

Screws

x 4

N - Levelers x 4

M - C-Leg x 1

O - Base Forks x 1

B - 5/16 x 5/8 in

Screws

x 12

Summary of content (5 pages)

PAGE 1
a s s e m b ly Arena 9972 Component List A - 5mm Allen Wrench x1 B - 5/16 x 5/8 in Screws x 12 C - Spine x 1 bdiusa.com instructions customerservice@bdiusa.com Your Arena Flat Panel Mount is engineered for easy assembly. Carefully follow this procedure to prevent any damage. Placement and Maintenance Arena Flat Panel Mount is designed for indoor use on level floors. Clean steel parts with a moist cloth. NOTICE: Arena performs best against or near a wall.
PAGE 2
Step 3 Lower Spine (C) onto upright Base Forks/C-Leg assembly on floor, then fasten securely into place using four (4) 5/16 x 5/8 in Screws (B) and provided Allen Wrench (A). NOTE: Be sure that the side with large openings faces rearward. B Step 4 Attach each Swiveling Bracket Assemby (D) to top of Spine (C) with four (4) provided 5/16” x 1 3/4 in Screws (E) using Allen Wrench (A). Be sure to position each Swiveling Bracket Assembly so that it aligns with and inserts cleanly into the Spine (C) holes.
PAGE 3
NOTE: Selecting the ‘side-mount’ Spine location for the Swiveling Brackets will position television close to rear of cabinet, but can limit left-to-right swiveling. Selecting the ‘front-mount’ Spine location will position television approx 1.5” closer to cabinet front and will enable maximum left-to-right swiveling adjustment.
PAGE 4
Step 6 Position each Vertical Mounting Bracket (I) on back of TV and attach using mounting screws and spacers (if required) provided in TV Mounting Kit (J). Each bracket must align vertically with the other. Both can be raised or lowered on back of TV at 1” increments. NOTE: Various mounting screws are provided in TV Mounting Kit (J), but some TVs may require specific hardware not provided by BDI. In such cases, please contact your TV manufacturer to identify and source your hardware.
PAGE 5
Step 7 (continue) Level the TV using the Leveling Discs (K) near the slots in the lower Horizontal Mounting Bracket (F). Then secure into place using provided Jam Nut (L) on exposed mounting stud until finger-tight. I L K F Step 8 Use the open channel inside Spine (C) to organize and route cabling to and from the TV. 5 assembly instructions bdiusa.com customerservice@bdiusa.