Installation Instructions

ManualsBrandsBDI ManualsWriting Desks & TablesBDI Corridor Charcoal Stained Ash Office Desk

Product Registration

Registering your new BDI product allows us to send you important

product updates, service information and helpful hints related to

your BDI products. Register today and you will be entered to win

free a BINK table from BDI. www.bdiusa.com/product-registration/

Placement and Maintenance

Corridor

Office furniture is designed for indoor use on level floors.

Clean glass with glass cleaner, and steel parts and wood veneer

with a moist cloth.

Your Corridor

Office furniture is engineered for easy assembly.

Carefully follow this procedure to prevent any damage.

Do not use power tools for assembly of this product.

Step 1

Unpack and identify the parts listed below. The assembly

workspace should be a non-marring surface such as carpet. For

missing hardware pieces, please contact BDI Customer Service

at customerservice@bdiusa.com. For all other concerns, please

contact your BDI retailer.

These distinctive product conﬁgurations are protected by US and international patents, trade dress, and/or

Made in China. 12.08.2015 V2

C1 Glass Panel

A1 Drawer

Assembly

A2 Left Leg

A3 Right Leg

C12 Removable

side panel x 2

C12 Removable

side panel x 2

A4 Wire Management

Trough

C10 Modesty Panel

C11 Wire Management Lid

C13 Center Drawer

Liner x 1

C14 Side Drawer

Liner x 2

T1 4mm Hex Wrench

H8 1/4-20 x 15mm

Screw x 4

H1 1/4-20 x 12mm

Screw x 3

H5 1/4-20 x 32mm

Screw x 6

H7 Barrel Nut x 4

H10 1/4-20 x 87mm

Screw x 2

H9 1/4-20 x 58mm

Screw x 6

H11 Bumper x 5

H13 Leveler x 4

H12 10-32 x 37mm

Screw x 4

Tool Required:

Phillips screwdriver

bdiusa.com

customerservice@bdiusa.com

CORRIDOR

6521

EXECUTIVE DESK

Summary of content (5 pages)

PAGE 1
CORRIDOR® 6521 EXECUTIVE DESK bdiusa.com customerservice@bdiusa.com Product Registration Registering your new BDI product allows us to send you important product updates, service information and helpful hints related to your BDI products. Register today and you will be entered to win free a BINK table from BDI. www.bdiusa.
PAGE 2
Step 2 - Install Base Aligning the Colored Dots on the same side, attach Wire Management Trough A4 to Modesty Panel C8 using Screw H1 and Hex Wrench. Keep screws loose until Step 7. A4 H1 (x3) Colored Dots C10 A4 C10 Step 3 - Match Colored Dot on Right Leg A3 with Colored Dot on Modesty Panel Assembly and attach using Screws H5 and Hex Wrench T1. Keep screws loose until Step 5. Repeat to attach Left Leg A2 to Modesty Panel Assembly. Install Glides H13 to the bottom of Legs A2 & A3.
PAGE 3
Step 4 - Insert Barrel Nut H7 into holes of Modesty Panel C10 with the elongated slot sitting horizontally, and secure with Screw H9 through side of Legs A2 & A3. Keep screws loose until Step 5. H9 H7 C10 H9 H9 H7 H9 A3 H7 Elongated slot in Barrel Nut H7 aligns with Screw H9 A2 Step 5 - Secure Drawer Assembly A1 to Leg Assembly using Screw H8 and Hex Wrench T1.
PAGE 4
Step 6 - Insert Bumpers H11 in the center hole and outer holes of Drawer Assembly A1. With the fabric side facing up, insert Center Drawer Liner C13 into the center drawer and Side Drawer Liners C14 into both side drawers. H11 H11 H11 H11 (x5) H11 A1 C14 (x2) C13 (x1) Step 7 - With the help of another person gently lower Glass Panel C1 onto Drawer Assembly A1 and fasten into place using Screw H9 and Hex Wrench T1.
PAGE 5
Step 8 - Place Wire Management Lid C11 into opening in Glass Panel. Attach Removable Side Panels C12 to Legs A2 & A3 using screws H12 (and a Phillips screwdriver) ensuring the top edge of the Side Panel C12 sits against the top inside edge of Leg A2 & A3. C11 H12 (x4) C12 C12 A3 A2 Step 9 - Place AC power strip/surge protector (not included) into Wire Management Trough A4. A4 A4 5 CORRIDOR 6521 EXECUTIVE DESK bdiusa.com customerservice@bdiusa.