INTERVAL™ 7247 & 7249 CABINET INSTRUCTION MANUAL LET’S GET STARTED.
Congratulations on the purchase of your Interval Cabinet from BDI. Your cabinet has been designed to provide a lifetime of enjoyment. This manual will provide you with assembly instructions and other helpful information to ensure that you get the most out of your product. Please save it for future reference. Your Interval Cabinet has been engineered for simple assembly. Please follow these directions carefully to prevent any damage. Should you need further assistance, contact BDI at customerservice@bdiusa.
HARDWARE HARDWAREAND ANDCOMPONENTS COMPONENTS Unpack and identify the parts listed below. The assembly workspace should be a non-marring surface such as carpet. Do not use power tools for the assembly of this product. For missing hardware pieces, please contact BDI Customer Service at customerservice@bdiusa.com. PART # DESCRIPTION PART # H1 DESCRIPTION M6 x 20mm Screw QUANTITY DESCRIPTION PART # DESCRIPTION QUANTITY 4 | BDIUSA.
HARDWARE AND COMPONENTS PART # C3 DESCRIPTION Cabinet, 7247 or 7249 (shown) QUANTITY PART # DESCRIPTION 1 C4 Glass Shelf QUANTITY 1 PART # C6 DESCRIPTION QUANTITY HARDWARE AND COMPONENTS PART # DESCRIPTION QUANTITY C5 Side Shelf 2 Removable Back Panel 2 NEED ASSISTANCE? customerservice@bdiusa.com BDIUSA.
ASSEMBLY STEP 1. ASSEMBLE BASE Attach (C1) Base Legs to (C2) Base Spanners using 8 (H1) Screws. Tighten with (T1) Hex Wrench. PART/DESCRIPTION QTY T1-HEX WRENCH 1 H1-SCREW 8 C1 H1 C2 C1 C2 H1 H1 6 | BDIUSA.
2 PERSON TASK STEP 2. ATTACH BASE TO CABINET ASSEMBLY With help from another person, carefully rotate the (C3) Cabinet backwards onto its top panel. Be careful not to rest the cabinet on its door. Attach the Base to the (C3) Cabinet using 8 (H2) Screws. Tighten with (T1) Hex Wrench. PART/DESCRIPTION QTY T1-HEX WRENCH 1 H2-SCREW 8 H2 H2 H2 H2 H2 H2 H2 C3 NEED ASSISTANCE? customerservice@bdiusa.com BDIUSA.
2 PERSON TASK ASSEMBLY STEP 3. INSTALL SHELF PINS With help from another person, carefully position the (C3) Cabinet onto its base as shown. PART/DESCRIPTION QTY Install the (H3) Shelf Pins by screwing them into the threaded inserts on the inside of the cabinet. H3-PINS 14 Install the (H3) Shelf Pins for the (C5) Center Shelf in their top most positions if you plan to use a soundbar that is wider than the middle section of the cabinet. C3 H3 H3 8 | BDIUSA.
STEP 4. INSTALL SHELVES ASSEMBLY Carefully place the (C4) Center Shelf into the (C3) Cabinet. The (C4) Center Shelf may be adjusted by unscrewing the shelf pins and repositioning them. C3 C4 Carefully place the 2 (C5) Side Shelves into the (C3) Cabinet. The (C5) Side Shelves are not adjustable. C3 C5 C5 NEED ASSISTANCE? customerservice@bdiusa.com BDIUSA.
ASSEMBLY STEP 5. INSTALL BACK PANELS The 2 (C6) Back Panels are removable and can slide towards the middle. To install, put the top edge of the back panel into the top groove, then drop the bottom edge into the bottom groove. Your Interval Media Cabinet comes with 2 (H4) KLEET Cord Wraps which can be used for cord management. A (H5) TV Safety Strap is included. To secure your TV to the cabinet, unravel the bundle and follow the instructions on the hang tag.
LEVEL THE CABINET Make sure the cabinet is level. Adjust one or more of the levelers using (T2) Leveler Wrench to attain a level stance. FINE TUNING PART/DESCRIPTION QTY T2-LEVELER WRENCH 1 Your Interval Media Cabinet features a push-to-open, drop-down soft open door. It is intended to be opened by gently pushing on the top of the door in the center 2" section of the door. NEED ASSISTANCE? customerservice@bdiusa.com BDIUSA.
FINE TUNING The hinges should not require adjusting. If the gap between the door and cabinet is uneven the hinges can be adjusted. Remove the cover using a slotted screwdriver (not included) to access the adjustment screws (see below). Your door should come pre-adjusted to open completely level. If you need to adjust the door opening angle, do so by inserting a 5mm Hex Wrench (not included) into the hole above the cable on the mechanism.
CARE & MAINTENANCE Your BDI furniture has been constructed with the finest materials, manufactured with care and is designed to last a lifetime. Regular care of your furniture will prolong your enjoyment and keep it looking its best. Here are some general tips for taking care of BDI furniture. Your surfaces may vary. GLASS The glass surface is maintained using household glass cleaner and a paper towel or cloth.
WARRANTY BDI warrants to the original purchaser that for the below-stated warranty term, BDI will repair or replace any product, part, or component covered by this warranty that fails under normal use as a result of a defect in material or workmanship. BDI will repair or replace the aforementioned product, part or component with a comparable product, part or component. The decision to repair or replace will be at BDI’s sole discretion.
WARNIN G SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM FURNITURE TIP-OVER. TO HELP PREVENT TIP-OVER: n n n n Install tip-over restraint. Place heaviest items in lower compartments. Never allow children to climb or hang on drawers, doors, or shelves. Never open more than one drawer at a time. USE OF TIP-OVER RESTRAINT MAY REDUCE—BUT NOT ELIMINATE—THE RISK OF TIP-OVER. NEED ASSISTANCE? customerservice@bdiusa.com BDIUSA.
These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright laws. Interval & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2022, BDI | V.03.30.2021 Made in China.