Instructions Manual

ManualsBrandsBDI ManualsBookcases & ShelvesMargo 5201 Toasted Walnut And Marine Modern Display And Shelf

A1 Left Shelf Frame x 1

A2 Right Shelf Frame x 1

C1 Shelf x 3

C2 Cabinet x 1

C3 Door Facia x 1

Product Registration

Registering your new BDI product allows us to send you important

product updates, service information and helpful hints related to your

BDI products. Register today, and you will be entered to win free a

BINK table from BDI: www.bdiusa.com/register

Placement and Maintenance

Your Margo Shelf is designed for indoor use on level floors.

Clean wood veneer and steel parts with a moist cloth.

Margo is engineered for easy assembly. Carefully follow this procedure to

prevent any damage. Do not use power tools for assembly of this product.

Step 1

This unit ships in 3 cartons (metal frames, cabinet & shelf, and sliding door

front) Unpack all cartons and associated hardware bags. Identify the parts

listed below. The assembly workspace should be a non-marring surface

such as carpet. For missing hardware pieces, contact BDI Customer

Service at: customerservice@bdiusa.com. For all other concerns, please

contact your BDI retailer.

bdiusa.com

customerservice@bdiusa.com

These distinctive product conﬁgurations are protected by US and international patents, trade dress, and/or

Made in China. 8.06.2019 V7

MARGO

™

5201

Shelf

H1 M6 x 38 mm

Pan Head Screw x 12

H2 M6 x 12 mm

Pan Head Screw x 2

H4 Wall Anchor

Strap x 2

H3 Thumb Screw x 2

Component List

T1 Hex Driver x 1

T3 Leveler wrench x 1

T2 Small Hex wrench x 1

Summary of content (8 pages)

PAGE 1
MARGO™ 5201 Shelf bdiusa.com customerservice@bdiusa.com Product Registration Registering your new BDI product allows us to send you important product updates, service information and helpful hints related to your BDI products. Register today, and you will be entered to win free a BINK table from BDI: www.bdiusa.com/register Component List T1 Hex Driver x 1 T2 Small Hex wrench x 1 Placement and Maintenance Your Margo Shelf is designed for indoor use on level floors.
PAGE 2
Step 2 - Place the cabinet C2 on the floor with the sliding door track towards the top front edge. Slide the door frame towards the middle. Orient the door facia C3 as shown with the threaded holes behind the left side. Position the door facia C3 into the door frame and shift it to the right while holding the left edge of the door frame to prevent it from sliding.
PAGE 3
Step 3 - Making sure the levelers are facing down, place the left and right shelf frames at least 2' off the wall (to allow space to tighten screws behind the frames) and exactly 30.5" (780mm) apart from each other as shown. Use the cardboard template provided. A1 Left Shelf Frame A2 Right Shelf Frame 30.
PAGE 4
Step 5 - Make sure the cabinet is oriented right side up with door track on top. With help from another person, carefully slide the cabinet into the opening in the frame and center it so that the 2 holes on top of the cabinet are directly under the frames. Slide the cabinet all the way back and attach to the frame as shown using 4 pan head screws H1 and hex driver T1. DO NOT tighten the screws fully yet.
PAGE 5
Step 7 - With help from another person, move your Margo shelf next to the wall. Check to make sure your Margo shelf is parallel to the wall. If it is leaning forward use leveler wrench T3 to turn the levelers under the front legs in the direction indicated below until the unit is level.
PAGE 6
Step 8 - Door Stops Your Margo Console sliding door has 2 green door stops located at each end of the upper aluminum track. The door stops are preset to allow the door to stop in the correct position. If your door(s) do not stop at the preset position indicated below, it is likely they may have moved during transit and handling. You will need to reposition and tighten the door stop using Small Hex Wrench T2. The end of the door stops should be exactly 19mm (3/4") away from the end of the track.
PAGE 7
Step 9 - Secure your Margo Shelf to the wall using the supplied wall anchor strap H4. Attach the straps to the tops of the back frames (either one) with pan head screws H2 and hex driver T1. Secure the other end of the strap to the wall using an appropriate third party insert and screw made for your wall material. Attach to either the inside or outside frame H4 Wall anchor strap x 2 H2 x 2 7 MARGO 5201 Shelf 2 Person Task 3rd party wall insert bdiusa.com customerservice@bdiusa.
PAGE 8
User Guide: Warning! • For safety, the Margo Shelf MUST be attached to the wall. • Failure to secure your Margo Shelf to the wall could lead to FATAL INJURY. • NEVER climb the Margo Shelf. • If you have small children make sure they NEVER climb the Margo Shelf. Suggestions: • Use a step ladder to reach items on the top shelf if needed. • Place heavier objects on the bottom shelves • The wall anchor straps should be attached behind the upper shelf. • Enjoy! 8 MARGO 5201 Shelf bdiusa.