VOCA® 3501 OFFICE CHAIR INSTRUCTION MANUAL LET’S GET STARTED.
Congratulations on the purchase of your Voca Office Chair 3501 from BDI. Your office chair has been designed to provide a lifetime of enjoyment. This manual will provide you with assembly instructions and other helpful information to ensure that you get the most out of your product. Please save it for future reference. Your Voca Office Chair has been engineered for simple assembly. Please follow these directions carefully to prevent any damage.
HARDWARE HARDWAREAND ANDCOMPONENTS COMPONENTS Unpack and identify the parts listed below. The assembly workspace should be a non-marring surface such as carpet. For missing hardware pieces, please contact BDI Customer Service at customerservice@bdiusa.com. Do not use power tools for the assembly of this product. For all other concerns, please contact your BDI retailer.
HARDWARE AND COMPONENTS PART # DESCRIPTION QUANTITY PART # DESCRIPTION QUANTITY C4 Armrest (Left & Right) 1 of each C6 Base 1 NEED ASSISTANCE? customerservice@bdiusa.com PART # DESCRIPTION C5 Lift Column QUANTITY 1 PART # C7 DESCRIPTION QUANTITY Swivel Wheel 5 BDIUSA.
ASSEMBLY STEP 1. CONNECT SEAT MECHANISM Using the box as a workbench, position the (C1) Backrest Assembly as shown. Connect the (C3) Seat Mechanism to the (C1) Backrest Assembly using 3 (H1) Screws with Washers. Tighten with (T2) 5mm Hex Wrench. PART/DESCRIPTION QTY T2-HEX WRENCH 1 H1-SCREW 3 H1 H1 C3 H1 C1 C3 C1 6 | BDIUSA.
STEP 2. ATTACH ARMREST ASSEMBLY On the other end of the box, place (C2) Seat upside down. Attach (C4) Left and Right Armrest using 6 (H3) Screws and tighten with (T1) 4mm Hex Wrench. PART/DESCRIPTION QTY T1-HEX WRENCH 1 H3-SCREW 6 H3 H3 C4 C2 C4 NEED ASSISTANCE? customerservice@bdiusa.com BDIUSA.
ASSEMBLY STEP 3. ATTACH BACKREST / SEAT MECHANISM Position the Backrest/Seat Mechanism Assembly on top of the (C2) Seat. Attach with 4 (H2) Screws and tighten with (T2) 5mm Hex Wrench. PART/DESCRIPTION QTY T2-HEX WRENCH 1 H2-SCREW 4 H2 H2 H2 H2 C2 8 | BDIUSA.
STEP 4. INSTALL LIFT COLUMN ASSEMBLY Position the (C5) Lift Column’s narrow end into the hole on the bottom of the (C3) Seat Mechanism. Press into place. C5 C3 STEP 5. INSTALL SWIVEL WHEELS ASSEMBLY Position the (C6) Base upside down on the carpeted floor. Press the (C7) Swivel Wheels firmly into the holes until they lock. C7 C7 C7 C7 C7 C6 NEED ASSISTANCE? customerservice@bdiusa.com BDIUSA.
ASSEMBLY STEP 6. CONNECT THE BASE Connect the (C6) Base to the chair either right side up (with base on the floor as shown) or upside down on top of the box. C5 C6 10 | BDIUSA.
FUNCTION ADJUSTING ARMRESTS ADJUSTING BACK HEIGHT Lift the button under the arm to adjust the height. Further, refine your settings by grasping the top of the arms and sliding in any direction. For optimal ergonomic positioning, elbows should stay close to your sides and your wrists should be straight. The back support assembly is adjustable with an internal lift mechanism. While seated or standing, lift the back to adjust to one of eight preset positions.
WARRANTY BDI warrants to the original purchaser that this product shall be free of defects in assembly, material, or workmanship for five (5) years from the original date of retail purchase. In the event of a proven defect in this product’s assembly, material, or workmanship within five (5) years from the original date of purchase, BDI will replace any such defective part(s). This warranty coverage is based on an 8-hour shift by any user weighing up to 300 lbs.