Specifications

Page 6 of 10
75.0082.05 20080125
PROGRAMMING
GUIDE – Cont.
KEY USER
’
S ACTIONS DEFAULT LED STATUS
PATTERN
WIDTH
The PATTERN WIDTH refers to the width of
the detection pattern. Patterns may be
programmed independently for the ‘door
open’ and ‘door closed’ positions.
1= Wide Pattern (ABCD)
2= Wide Left Pattern (ABC)
3= Wide Right Pattern (BCD)
4= Narrow Left Pattern (AB)
5= Narrow Center Pattern (BC)
6= Narrow Right Pattern (CD)
See Page 8
Door
closed=1
Door
Open= 1
DEFAULT
VALUES KEY
(Magic Wand)
N/A
The DEFAULT VALUES key is used to
restore default values and is also used for
launching a sensor set-up.
1= Door Closed Set-Up
2= Door Open Set-Up
3= Reset Factory Defaults
(can be pressed while in
door open or door closed
position).
After pressing the PATTERN WIDTH
key, the red LED flashes quickly. After
pressing a number button, the red LED
flashes slowly. After any pattern
adjustment, simply launch another
setup for the respective door position,
using Magic Wand + 1 (door open) or
2 (door closed).
After pressing the DEFAULT VALUES
key, the red LED flashes quickly. After
pressing a number button, the sensor
launches an immediate set-up as
indicated by a flashing red LED. For
values 1 & 2, the door must be
positioned respectively so the sensor
can learn the proper environment.
AUTO-LEARN
TIME
The AUTO-LEARN TIME enables the DK-
12 to adapt to new permanent changes
within its field of detection, after the set time
(below) expires. Once expired, the DK-12
will return to a state of non-detection.
0= 30 seconds
1= 1 minute
2= 2 minutes
3= 3 minutes
4= 5 minutes
5= 7 minutes
6= 10 minutes
7= 15 minutes
8= 20 minutes
9= 25 minutes
1
After pressing the AUTO-LEARN TIME
key, the red LED flashes quickly. After
pressing a number button, the red LED
flashes slowly.
FREQUENCY
The FREQUENCY key allows for the
change of operating frequency to reduce
cross-talking between sensors.
1= High Frequency
2= Low Frequency
1 After pressing the FREQUENCY key,
the red LED flashes quickly. After
pressing a number button, the red LED
flashes slowly.
NOT USED