User`s guide

75.5134.10 EN 20110519 Page 13 of 13
COMPANY
CONTACT
ANSI / AAADM
COMPLIANCE
STATEMENT
ANSI / AAADM Compliance
AAADM American Association of Automatic Door Manufactures
Upon finishing the installation and/or service work perform at a minimum a daily safety check in
accordance with the minimum inspection guidelines provided by AAADM. Provide each owner
with an owner’s manual that includes a daily safety checklist and contains at a minimum the
information recommended by AAADM. Offer a familiarization session with the owner explaining
how to do daily inspections and calling out location of cutoff switches to put equipment out of
service if a deficiency is noted. The equipment should be inspected in accordance with the
minimum inspection guidelines annually. A safety check that includes at a minimum the items
listed on the safety information label must be performed during each service call. If you are
not an AAADM certified inspector BEA strongly recommends to have an AAADM certified
inspector perform an AAADM inspection and placing a valid inspection sticker below the safety
information label prior to placing the equipment into operation.