ASSEMBLY INSTRUCTIONS Description : DELUXE X BACK CHAIR RTA Printed in Vietnam -1-
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. Please take the time to read and follow the assembly instructions carefully. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Please separate, identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
HARDWARE LIST When unpacking, please carefully not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: NO Description Qty 1 Short bolt ( M6 x 35mm) 3 5 Sketch NO Description Qty 2 2 Long bolt (M6 x 60mm) 8 Screw (M4 x 35mm) 6 4 Lock Washer (6.5 x 11mm) 10 Flat Washer (6.5 x 19mm) 10 6 Allen Key (K4x80mm) 1 Sketch STEP 1 Attach seat frame (B) to the back (A) by using bolts (2), washers (4) and (5), as shown below.
STEP 2 Attach Front Legs (D) to the seat frame (B) with bolts (2), and washers (4) and (5), as shown below. Tighten with Allen Key (6). Place side stretcher (E) between front legs, attach with screws (3) as shown below. Tighten with a screwdriver STEP 3 Attach the seat (C) to top of the seat frame (B) with screws (3), as shown bellow. Tighten with a screwdriver.
