Replacement Part List

26FB
TURF BEAST
Rev: July 2015
TURF BEAST Finish Mower
11
Assembly Instructions
Step 5: Fuel tank connections
Locate the fuel tank on the fuel tank bracket with the
recessed area pointing toward the rear so any spills
drain away from the engine. Align the fuel valve in the
center of the clearance hole. Place the fuel tank straps
into position, wrapping them around the tank and the
bracket.
Once the fuel tank and straps are in place, securely
tighten the straps using the bolts provided. Next, firmly
attach the fuel line to the fuel valve nipple. Tighten all
connections to ensure they are firm and secure so the
fuel system is tightly attached.
DANGER GASOLINE IS HIGHLY FLAMMABLE AND
EXPLOSIVE. FUEL LEAKS, A LOOSE FUEL TANK,
OR A LOOSE FUEL VALVE CAN LEAD TO SEVERE
INJURY OR DEATH. ENSURE ALL CONNECTIONS
ARE SECURE AND INSPECT THOROUGHLY FOR
ANY POTENTIAL LEAKS IN THE FUEL SYSTEM. IF
YOU FIND A LOOSE CONNECTION OR A LEAK,
MAKE AN IMMEDIATE REPAIR OR ASK FOR
ASSITANCE FROM A PROFESSIONAL MECHANIC OR
SERVICE CENTER.
Step 6:
Brake
Set-up
1. Set
the brake bar 3/4-1
inch from the tire.
2. With the brake
DO NOT OPERATE THIS MOWER IF ANY
COMPONENT OF THE FUEL SYSTEM IS
DANGER
pivot leaning slightly forward, install the
washer and pin.
3. Slide the brake handle
to the bottom of the slot
then connect the brake
pivot to the brake
handle.
Battery pan
Note: Verify tire
pressure. Do not
exceed the
recommended
maximum.