Instructions / Assembly

headboard bracket installation guide

(optional)

a.) Align the hole in the bracket to the brass sleeve into

which the leg threads. Hold the bracket in place and

screw the leg into the base until it is snug. DO NOT

OVERTIGHTEN. Too much force may cause the leg

to spin freely.

b) Align the tab with the hole in the frame (located

towards the foot of the base) and use a short bolt

and nut to secure the bracket. Make sure the bolt is

tight.

A 9/16” (14 mm) & 1/2” (13 mm) socket and crescent wrench are necessary to complete installation.

HEADBOARD BRACKET COMPONENTS

Headboard Bracket (2) T-Bracket (2) Spacer (2) Long Bolt (8) Short Bolt (10) Nut (18)

You may now connect your headboard to the attachment plates using the remaining short bolts and nuts to

secure it to the brackets. The heads of the bolts will face outward. Use a 9/16" (14mm) socket and 1/2" (13mm)

wrench to tighten the bolts.

Attach the plastic spacer and T-Bracket.

a.) Measure the distance between the mounting

holes on the headboard and install the spacer and

attachment plate to accommodate the headboard.

b.) To install the plastic spacer and attachment plate,

you will need (2) long bolts and (2) nuts. Place the

spacer and attachment plate in the desired location

and slip the bolts through the holes with the head

of the bolt facing outward. Position the bolts

diagonally on the spacer. Use the 9/16” (14 mm)

socket and wrench to tighten the bolts.

STEP