Use and Care Manual

STEP

setting up two bases

Connecting straps are secured to the base frame upon delivery.

With the bases in their desired location, slightly loosen both legs

to allow the strap to ﬁt on the leg bolt, between the leg washer

and frame.

Slide side (a) of the connecting strap onto leg bolt. Swing the strap and connect side (b) to the leg bolt. Secure

the strap by shifting to the left.

Re-tighten legs. Do not over tighten. Use the remaining strap and repeat on other end of the base.

If a split setup is being installed, plastic connecting straps are provided (one per base) to secure the bases

together. Use both straps to secure the head and foot portions together.

a b

STEP