Installation Guide

11
remote control pairing
Unplug the Power Cord from your power outlet. Wait 1
minute, then plug it back in to your power outlet. Perform
Step 2 within 10 seconds, while the control box light is
ashing.
The remote is now paired to the adjustable base. Test all
remote functions. If the remote buttons do not impact the
adjustable base movements, please repeat the process
again.
PAIR button
Press and hold the PAIR button on the back of the remote.
The PAIR button will illuminate and start to ash. When the
PAIR button stops ashing, the LED light on the control box
will stop ashing. Release the PAIR button.
STEP 1
STEP 3
STEP 2
Remote Pairing
The original remote that comes in the box is already paired to the adjustable base. No further action is required. In the event
that the remote is not paired with the base, follow the steps below.
Power Cord
Power Supply