Installation Guide

Truck bed
Riv nut tool
5/16 x 2” bolt
Riv nut anchor
X4
STEP 4.
INSTALL (4) RIV NUTS
Move BEDSLIDE® to access the (4) marked holes for the center cross member and drill through the bed
using the ½”drill bit. Next, insert a 5/16 bolt through the riv nut tool and into a riv nut. Insert the assembly
into a mounting hole. Tighten the bolt while holding the riv nut tool with a ½”wrench making sure the
assembly sits flush with the bed. As you tighten the bolt the riv nut will compress from underneath and
secure to the bed. Repeat to the remaining hole.
Do not over tighten! Do not use air impact tools!
BEDSLIDE.COM | 888.807.0099
Page 3 of 5