Installation Guide

GET TO IT.
Supplied Hardware: (14) 1/4-20 Allen head bolts,
(18) UHMW mount blocks, (4) D-ring tie downs,
(2) Corner towers, (2) Side towers, (1) Head rail,
(2) Side rails
Tools Needed: Allen head wrench
ASSEMBLY
INSTRUCTIONS
STEP 1.
INSERT (2) MOUNT BLOCKS INTO BEDTRAX (CAB END)
Loosen set screw on one of the plastic end caps of the front (cab end) BEDTRAX. Remove end cap
and insert (2) MOUNT BLOCKS. Re-install end cap and tighten the set screw. These MOUNT BLOCKS
will be used to secure the corner towers in the next step.
Page 1 of 7
BEDSLIDE.COM | 888.807.0099
CAB END BEDTRAX (SIDE VIEW)